What’s in the Box? 📦

When you open your Ocean Mist PJ 3000 LED Floating Fountain, you’ll find:

✔️ Detachable floating ring.
✔️ Submersible LED light ring with 19″ diameter
✔️High-power Jebao water pump.
✔️ 12VAC transformer with 33′ cord.
✔️ Nozzles (3 Types) – Choose from:

• M nozzle – Standard spray.
• Spectacular nozzle – Creates a two-tiered water effect.
• Trumpet nozzle – Higher, more concentrated spray.
  ✔️ Pump Unit (KF33000) – A high-flow, variable-speed asynchronous pump.
  ✔️ Power Cords & Extensions –
• 60+ ft power cord for the pump.
• 33 ft power cord for LED lights + optional 33 ft extension.
  ✔️ Pump Filter Bag – Helps prevent debris from clogging the pump.

Step-by-Step Installation Guide

Follow these simple steps to get your LED Floating Fountain up and running:

Step 1: Choose the Right Location

🏞️ Pick a calm, open area in your pond, pool, or lake.

💡 Important: The fountain should be placed in at least 24 inches (2 feet) of water to prevent debris from clogging the pump.

Step 2: Assemble the Fountain

1️⃣ Attach the LED Light Ring – The LEDs and the float are separate, so you’ll need to screw them together.
2️⃣ Connect the Pump to the Float –

• Screw the pump unit into the bottom of the float.
• Secure the nozzle of your choice on top.
• Tighten everything firmly, but don’t overtighten.

💡 Be careful—some parts have sharp edges. Handle with care!

Step 3: Secure the Anchoring System

🏗️ Anchor Options:

• Use rocks, stakes, or weights to hold the fountain in place.
• If placing in a deep lake, use a submerged anchor to prevent drifting.

💡 This ensures your fountain stays in one spot, even in windy conditions.

Step 4: Connect the Power Supply

🔌 For Standard Models:

• Plug the flow controller into a GFCI-protected outdoor outlet.
• Connect the pump and LED power cords to the controller.

🔆 For Solar-Powered Models:

• Place the solar panel in direct sunlight.
• Adjust the panel’s angle for maximum energy absorption.

💡 Tip: Use a waterproof extension cord if the outlet is far from the water.

Step 5: Adjust the Settings & Test the Fountain

✅ Turn it on and watch the LED lights and water spray come to life.
✅ Use the remote control (up to 150 feet range) to:

• Adjust water height and flow speed.
• Turn the LED lights on/off.
  ✅ Check for any leaks or misalignment, and adjust if needed.

💡 Tip: The photocell sensor can be set to turn the fountain on/off automatically with sunrise/sunset!

Watch the Installation Video for a Full Walkthrough 🎥

📌 VIEW HERE

Get Your LED Floating Fountain Today!

Now that you see how easy it is to install, why not grab one for your outdoor space?

🔥 Explore the full range of LED Floating Fountains at Wiedamark.com ➜ CLICK HERE

📌 Looking for more outdoor lighting ideas? Check out our Best Outdoor LED Lights for 2025