USB 2.0 DMX512 interface, 1 x 512 DMX channels IN/OUT
The US Bone allows you to control 512 DMX channels using MADRIX.
But an additional MADRIX KEY (i.e. a software license) is necessary
DMX-IN/OUT with 5-pin NEUTRIK XLR Port
This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.
USB 2.0 Standard
The latest USB 2.0 standard is fully supported to allow
for a higher maximum speed of 480Mbit/s.
Power Over USB
The interface is powered directly via the USB port and does not need an additional power supply.
High Quality
The US Bone represents high quality made in Germany
and is very reliable.
Hot Swapping & Plug and Play
Devices can be connected to and disconnected from the computer during use and without a reboot.
Remote Control
MADRIX can be controlled remotely using the built-in DMX-IN protocols.
Frame Rate Stability
Up to 60 devices can be connected to a single USB host controller without having any frame rate problems. (60 DMX512 interfaces amount to 30,720 DMX channels.)
Please connect every US Bone to an active USB 2.0 port or use a USB 2.0 hub with a power supply.
Click for additional support.
