This is a compact LED driver with a magnetic transformer core. It is equipped with one push-to-reset circuit breaker on the output, which protects both the load and the driver. The driver is encased in a coated metal box that includes 2 knock-outs on the bottom to enable easy installation that complies with electrical code requirements. Low operating temperature. Acoustic humming and buzzing free. Push-to-reset circuit breaker on output. Works with low voltage TRIAC dimmers. Two bottom knockouts. ETL and CSA are listed. UL standard 8750.
Diode LEDs dimmable magnetic DC drivers are built especially for LED systems. They provide the following benefits:
- Auto-Reset Circuit Breakers The AR series offers breakers on both the input and the output.
- Compatibility There are no minimum load requirements when used with a dimmer. The drivers cause no flicker or any of the other side effects that can result from a lack of synchronization between voltage mode drivers and PWM low voltage drivers in the light fitting.
- Perfect Dimming Fully compatible with low voltage dimmers, in contrast to voltage mode drivers that balance the voltage in the system and prevent the dimmer from working.
- Lower Power Consumption Bring about an improvement in the efficiency of 15%, due to the avoidance of unnecessary double conversion in the circuitry.
- No RFI Issues Operate at a perfect 60Hz sinus wave, therefore they produce no radio frequency interference whatsoever.
Specs:
- Depth: 3.5 in.
- Frequency: 60Hz
- Height: 9.8 in.
- Industry Standards: ETL, CSA, UL 8750
- Input Voltage: 120
- Length: 6.06 in.
- Output Voltage: 24VDC
- Watts: 300
- Width: 4.2 in.
